Yaesu GS-23 computer control board

Yaesu GS-23 Antenna Rotator Control Unit

The GS-23 and GS-232 provide digital control of most models of Yaesu antenna rotators from the serial port of an external personal computer. The GS-23 is an optional expansion board that can be installed in the Controller Unit of Yaesu Model G-800SDX, G-1000SDX and G-2800SDX Antenna Rotators for azimuth control. and can also be used with the G-500A Elevation Rotator when coupled through the option al GX-500 Automatic Control Adapter.
The GS-23 includes a 1-meter serial cable with a DB-25P male plug for connection to the computer (a gender changer may be required). Firmware on the GS-23/-232 supports either direct keyboard control, or commands from programs written specifically to support it (software is not supplied by Yaesu). In addition to reading and setting antenna angle and rotation speed, the firmware includes clocked positioning routines to automatically step the antenna through up to 3800 angles at programmable intervals, such as for tracking band openings or satellites (with an elevation rotator).

Please read this manual carefully to install the GS-23 and GS-232. If also installing a G-400 or G- 500A with the GX-500 Automatic Control Adapter, follow the procedures in the GX-500 manual before installing the GS-23/-232.

Misschien ook iets voor u

Yaesu G450C Antenne Rotor €429,00

Yaesu G1000DXC antennerotor €645,00

Yaesu G1000C antennerotor €595,00

Yaesu GX-500 automatic control adaptor €99,00