Icom IC7200 zendontvanger voor HF+50 Mhz

LET OP! VERGUNNING NODIG! LEES MEER

De ICOM IC-7200 is een robuust gebouwde amateur transceiver met alle HF amateur banden plus 6 meter
Ideaal voor binnen en buitengebruik, zeer eenvoudig en 'op het gevoel' te bedienen door goed doordacht bedieningspaneel. 

Vermogen is 100 watt.
Met o.a. DSP filtering, digital twin passband tuning, manual notch filter, keypad entry, dual VFOs, front speaker,
voice synthesizer, 200 memories, attenuator, RIT, scanning, 1 Hz tuning, USB poort op achterzijde en meer!

The Icom IC-7200 rear panel features a "rear bumper" that protects various connectors on the rear panel and lets you stand the radio on its rear end when the antenna is disconnected. Jacks include: USB Port / Key / ALC  / ACC / Remote / Tuner / External  Speaker / Antenna (SO-239) / Ground

IF DSP
The latest IF DSP technology is employed in the IC-7200. While the IC-7200 is an entry-class transceiver, advanced digital features are comparable to higher class transceivers

AGC loop management 
Distortion and blocking from strong nearby signals are prevented by placing DSP functions inside the AGC loop. The AGC time constants are selectable from fast, slow and off for each operating mode .

Digital IF filter 
Optional filters will be never required for the IC-7200. The built-in digital filter allows you to flexibly select the filter width and shape from soft and sharp* and provides cuttingedge filter characteristics. * Filter shape is selectable for SSB and CW modes only.

Digital Twin PBT 
Only Icom brings you Twin Passband tuning! Tailor your IF passband with the Twin PBT by electronically shifting the upper and lower edges of the IF filter. Depending on the use of the concentric knobs, you can either narrow the IF passband, or shift the entire passband to eliminate interfering signals.

Manual notch filter 
The manual notch filter delivers more than 70dB of attenuation. Strong interfering tones will be eliminated without adversely affecting the AGC loop performance. On the bottom right of the front panel, a dedicated control knob adjusts the notch filter frequency.

Digital noise reduction 
Digital noise reduction reduces background noise and improves the signal-to-noise ratio. The noise reduction level is adjustable in 16 steps. It improves the readability of voice and data signals.

Digital noise blanker 
The noise blanker reduces pulse-type noise such as engine ignition and sparking. The NB level and width (blanking duration) are adjustable in 100 steps.

High stability transmitter 
The DDS (Direct digital synthesizer) creates a clear, clean transmit signal and improves the C/N ratio. With a dual-fan cooling system, the IC-7200 provides stable high quality output even during high duty cycle operation.

USB port for PC control 
The IC-7200 can be controlled by a PC through a USB port using the CI-V data format. In addition, modulator and received audio can also be transferred over the USB cable. By using appropriate external software, you can record incoming call and/or transmit preprogrammed messages from your PC.

RF speech compressor 
The digital RF speech compressor increases your average talk power in SSB mode. Even when the compression level is increased, the DSP controlled RF speech compressor provides low distortion audio.

CW mode operation 
Full break-in, selectable CW carrier point (USB or LSB) and adjustable CW pitch are also standard.

Tough construction against water intrusion 
Waterproof protection technologies that are used in Icom’ s marine radios are applied to the buttons and knobs on the front panel to provide a measure of protection against water intrusion. *IC-7200 is NOT waterproof .

Rugged design for outdoor use 
The rugged design of the IC-7200 means your enjoyment of this rig is not limited to your shack only.

Other features:

SPECIFICATIONS     Frequency range : Rx  0.030-60.000000 MHz   Tx  1.800-1.999999 MHz           3.500-3.999999 MHz           7.000-7.300000 MHz           10.100-10.150000 MHz           14.000-14.350000 MHz           18.068-18.168000 MHz           21.000-21.450000 MHz           24.890-24.990000 MHz           28.000-29.700000 MHz        50.000-54.000000 MHz Mode : USB, LSB, CW, RTTY(FSK), AM No. of memory Ch. : 201 (199 regular, 2 scan edges) Frequency resolution : 1 Hz Frequency stability : Less than ±0.5ppm Power supply requirement : 13.8 V DC ±15 % (negative ground) Current drain (at 13.8 V DC) : Receive   Stand-by   max. audio   1.3 A   2.0 A   Transmit   max. power   22.0 A Operating temp. range : -10°C to +60°C Antenna connector : SO-239 (50) Dimensions   (projections not included) : 241(W) × 84(H) × 281(D) mm    Weight (approx.) : 5.5 kg ACC connector : 13-pin REMOTE connector : 2-conductor 3.5 (d) mm (18")  TRANSMITTER Modulation system : SSB   Digital PSN modulation   AM     Digital Low level modulation Output power : SSB, CW, RTTY   AM   2-100 W   1-40 W Spurious emissions HF : Less than -50 dB Spurious emissions 50MHz : Less than -63 dB Carrier suppression : More than 50 dB Unwanted sideband : More than 50 dB Microphone connector : 8-pin connector (600) KEY connector : 3-conductor 6.5 (d) mm SEND connector : Phono (RCA) ALC connector : Phono (RCA)  RECEIVER Receiver system : Double-conversion superheterodyne Sensitivity (10 dB S/N) : SSB, CW, RTTY   AM   0.16µV (1.8-29.999999 MHz)   13 µV (0.5-1.799999 MHz)   2 µV (1.8-29.999999 MHz) SQL sensitivity : Less than 5.6 µV (SSB) Selectivity : SSB,   CW   RTTY   AM   More than 2.4 kHz/-6 dB   Less than 3.6 kHz/-60 dB   More than 500 Hz/-6 dB   Less than 900 Hz/-60 dB   More than 360 Hz/-6 dB   Less than 650 Hz/-60 dB   More than 6.0 kHz/-6 dB   Less than 15 kHz/-40 dB   Spurious and image rejection ratio : More than 70 dB (1.8-29.999999 MHz) Audio output power  (at 13.8 V DC) : More than 2.0 W    at 10% distortion with an 8 load RIT variable range : ±999 Hz EXT SP connector : 2-conductor 3.5 (d) mm  /8 Supplied accessories: Hand microphone DC power cable ACC cable Spare fuses All stated specifications are typical and subject to change without notice or obligation. OPTIONS IC-PW1 HF+50 MHz 1 kW HF LINEAR AMPLIFIER  Covers all HF and 50 MHz bands, provides clean, stable 1 kW output. Automatic antenna tuner and compact detachable controller are standard. 2 exciter inputs are available. (An optional OPC-599 is required.) AH-2b ANTENNA ELEMENT For mobile operation with the AH-4. All bands between 7-30 MHz can be matched. AH-4 HF+50 MHz AUTOMATIC ANTENNA TUNER Covers 3.5-30 MHz with a 7 m (23 ft) or longer wire antenna. AT-180 AUTOMATIC ANTENNA TUNER Compact, light weight antenna tuner. PS-85 DC POWER SUPPLY Output: 13.8 V DC (20 A max.) SM-20 DESKTOP MICROPHONE High quality desktop microphone. Includes.[UP] / [DOWN] switches and low cut function. HM-36 HAND MICROPHONE Same as that supplied. CT-17 CI-V LEVEL CONVERTER For remote transceiver control from a PC equipped with an RS-232C port. AH-710 FOLDED DIPOLE ANTENNA Covers from 1.9 to 30 MHz band. Has an SO-239 connector. Easy to assemble (non-kink construction). IC-PW1 HF+50 MHz 1 kW LINEAR AMPLIFIER Covers all HF and 50 MHz bands, provides clean, stable 1 kW output. Automatic antenna tuner and compact detachable controller are standard. 2exciter inputs are available SP-10 EXTERNAL SPEAKER SP-20 EXTERNAL SPEAKER 4 AUDIO FILTERS SP-21 EXTERNAL SPEAKER OPC-599 ACC 13 PIN CABLE ADAPTER MB118 MOBILE BRACKET MB-117 CARRYING HANDLE MB-116 HANDLE