SCS Tracker / DSP TNC

SCS Tracker / DSP TNC

Zeer compacte unit !

APRS stand alone operation
Laag stroom verbruik (typ. < 50 mA)
GPS interface for NMEA data (input and output)
All gangbare Packet-Radio modes incl. SCS Robust-Packet-Radio
De SCS Tracker / DSP TNC is werelds eerste Terminal Node Controller welek gebruikt maakt van Digital Signal Processor (DSP) als protocol en als modem processor.
De zo onstaande samenwerking tussen het hardware nivo en de hoger protocol levels bied de mogelijkheid tot bijzondere prestaties.

De mogelijkheden:

Multi-detector voor 300 Bd AFSK.
Signal processor ±400 Hz
Tuning is niet nodig, gebeurd volledig automatisch.
Transmit- and receive filters voor 1200 Bd AFSK
Adaptive DC-removal by the signalprocessor at 9600 und 19200 Bd Direct-FSK.

The Tracker / DSP TNC wordt standaar geleverd met een temperature compensated crystal oscillator voor stabaliteit
Ingebouwde mogelijkheid voor GPS position reporting.
Packet-Radio operation for VHF and UHF tot 19200 baud.

Gemakkelijk te installeren en compatible met:Icom, Kenwood, Yaesu, SGC, SEA, Furuno, R&S and meer.

“Tracker/DSP TNC” has been designed by SCS for custom applications of transferring GPS positions and other small and reappearing sets of data from e.g. remote sensors by HF or VHF radio transmission using the new SCS "Robust-Packet" modulation. Typical applications are weather stations and the tracking of vessels, cars, trucks, containers and airplanes. The unit receives the GPS data from any external NMEA device and reports it to the host station.

Technical Data

• Universal TNC and APRS position tracker with DSP, USB-connection, output to control a switching relay (e.g. to switch the radio's power supply). NMEA input/output for GPS data, bi-coloured LED's, 4 DIP switch for the basic configuration.
• Optically isolated USB-connection to the computer, generally well filtered I/O's to avoid hum and susceptibility in HF environments. Metal case.
• Use of temperature stabilized oscillator (TCXO) for high reliablilty under all temperature conditions.
• 10..20 V DC supply power, use of highly efficient internal power regulators.
• Mini-Din connector, compatible to the usual transceiver "Packet-Connector".
• Currently implemented protocols: Generally AX.25, level 2.

Modulations

• 300 baud AFSK (old HF-Packet standard) with new developed multi-detector: The DSP automatically processes a frequency range of +- 400 Hz looking for 300 bd transmissions and receives all detected signals in PARALLEL. No exact tuning by the user is necessary any more, but always perfect reception! Very important feature for automatically operating HF APRS gateways.
• 200/600 baud "HF Robust-Packet", 8-tone PSK, 500 Hz bandwidth, automatic frequency tracking (RX) +- 240 Hz.
• 1200 baud AFSK (standard Packet-Radio) with special filtering to avoid adjacent channel interference, and degradations by AC hum.
• 9600/19200 baud direct FSK (G3RUH compatible) with optimized DC removal by the DSP.

APRS-Tracking-Mode

Position tracking mode to be activated by DIP-switch. Transmission of fixed or via NMEA (GPS) given position in free programmable time intervals in APRS format. Here the Tracker operates in "sleep mode" and just draws 15 mA of current (@ 13.8 V). Shortly before the next scheduled transmission it wakes up, switches on the radio, checks the channel for occupancies (DCD) and transmits the APRS datagram as soon as the channel is free. Afterwards the radio is switched off again and the Tracker enters "sleep mode".

• Operation modes and transmission level (audio) are adjustable by software command.
• Firmware upgrade via USB connector. Firmware stored in Flash-ROM, thus easily expandable for new operation modes with free of charge updates.
• Hostmode (compatible to all common hostmode programs like e.g. PAXON, WPP, etc.)
• KISS (compatible to all common KISS programs like e.g. UI-view).
• Small size, just 82 x 22 x 102 mm with 107 g of weight.
• Low power consumption (ca. 70 mA @ 13.8 V in regular operation and 15 mA in Tracker sleep mode).