Officiële import
Yaesu FTDX3000 HF/50 MHz 100W Transceiver
The NEW FTDX3000 Transceiver is the latest addition to the Yaesu family of fine Amateur Radios, incorporating the newest down conversion and sharp edged crystal roofing filter technology. These features provide outstanding receiver performance which is a heritage of the FT-DX5000. Our new transceiver also incorporates many other new features in a compact housing.
FT DX 3000 Brief Description
Rugged 100 Watt Output Power
The Amazing Crystal Roofing Filter performance has been proven in the FT DX 5000
The Down conversion 9 MHz 1st IF frequency receiver construction can realise narrow 300 Hz (optional), 600 Hz and 3 kHz bandwidth roofing filters.
Implementing the extra sharp Crystal Roofing Filters provides superior close-in dynamic range and affords the best receiver performance possible.
Outstanding Receiver performance is the heritage of the FT DX 5000
The Essential elements in receiver performance are the RF amplifier and the 1st mixer.
The RF Amplifier has optimized NF points, and the over-sized wide range RF transformer exhibits minimum saturation in strong signal processing. The optimized devices were selected to guarantee superior multi-signal RX performance.
The desired maximum performance has been realized in the development of the FT DX 3000 receiver circuitry. This new radio has the high dynamic rance IP3 performance that was realized and proven in the FT DX 5000.
IF DSP provides effective and optimized QRM rejection
The 32 bit high speed floating decimal DSP (max 2800 MIPS) provides effective cancellation/reduction (DNR) of the random noise that is frequently found on the HF Frequencies.
Auto-Notch (DNF) that automatically eliminates the dominant beat tone
CONTOUR and APF; very effective receiver noise reduction tools in the HF band operations.
Yaesu original DSP QRM and noise reduction are also provided with the new FT DX 3000.
Large and Wide Colour LCD Display
The high-resolution (480 x 272 dots) 3.5-inch wide colour LCD displays the operating information and the status of the transceiver functions.
The various FT DX 3000 functions are displayed on this LCD and provide the operator with easy to read operating information.
High Speed Spectrum Scope built-in
Although the FT DX 3000 only has one receiver, a high speed Spectrum Scope is built into the radio.
When in Auto Mode, the Spectrum Scope display is updated in real time.
The maximum bandwidth of the scope is 1 MHz, and the minimum span width setting is 20 kHz. The best desired span is selectable for the high-resolution display. The current band activity can be monitored in real time.
AF SCOPE display and RTTY/PSK encoder/decoder (optional)
The optional AF SCOPE and optional RTTY encoder/decoder functions have been developed for the FT DX 3000.
The wave form of the AF SCOPE signal can be displayed on the TFT LCD. Also, the RTTY/PSK text may be displayed on the LCD.
Independent Frequency Display
The Main operating frequency is the most important display in the radio, with VFO-A frequency located just above the main dial.
The newly-developed LCD has a wider viewing angle and higher contrast for convenient and effortless viewing.
Other Features
- Built-In Specialised Receiver amplifier for 50 MHZ
- Three antenna connectors are provided, with the possibility of assigning the "ANT-3" connector to "RX-Only"
- Signal output for an external receiver
- 9 MHz IF output
- High Speed Automatic antenna tuner built-in
- Optional µ-tune unit available
- USB Interface
FT DX 3000 Brief Description
Rugged 100 Watt Output Power
The Amazing Crystal Roofing Filter performance has been proven in the FT DX 5000
The Down conversion 9 MHz 1st IF frequency receiver construction can realise narrow 300 Hz (optional), 600 Hz and 3 kHz bandwidth roofing filters.
Implementing the extra sharp Crystal Roofing Filters provides superior close-in dynamic range and affords the best receiver performance possible.
Outstanding Receiver performance is the heritage of the FT DX 5000
The Essential elements in receiver performance are the RF amplifier and the 1st mixer.
The RF Amplifier has optimized NF points, and the over-sized wide range RF transformer exhibits minimum saturation in strong signal processing. The optimized devices were selected to guarantee superior multi-signal RX performance.
The desired maximum performance has been realized in the development of the FT DX 3000 receiver circuitry. This new radio has the high dynamic rance IP3 performance that was realized and proven in the FT DX 5000.
IF DSP provides effective and optimized QRM rejection
The 32 bit high speed floating decimal DSP (max 2800 MIPS) provides effective cancellation/reduction (DNR) of the random noise that is frequently found on the HF Frequencies.
Auto-Notch (DNF) that automatically eliminates the dominant beat tone
CONTOUR and APF; very effective receiver noise reduction tools in the HF band operations.
Yaesu original DSP QRM and noise reduction are also provided with the new FT DX 3000.
Large and Wide Colour LCD Display
The high-resolution (480 x 272 dots) 3.5-inch wide colour LCD displays the operating information and the status of the transceiver functions.
The various FT DX 3000 functions are displayed on this LCD and provide the operator with easy to read operating information.
High Speed Spectrum Scope built-in
Although the FT DX 3000 only has one receiver, a high speed Spectrum Scope is built into the radio.
When in Auto Mode, the Spectrum Scope display is updated in real time.
The maximum bandwidth of the scope is 1 MHz, and the minimum span width setting is 20 kHz. The best desired span is selectable for the high-resolution display. The current band activity can be monitored in real time.
AF SCOPE display and RTTY/PSK encoder/decoder (optional)
The optional AF SCOPE and optional RTTY encoder/decoder functions have been developed for the FT DX 3000.
The wave form of the AF SCOPE signal can be displayed on the TFT LCD. Also, the RTTY/PSK text may be displayed on the LCD.
Independent Frequency Display
The Main operating frequency is the most important display in the radio, with VFO-A frequency located just above the main dial.
The newly-developed LCD has a wider viewing angle and higher contrast for convenient and effortless viewing.
Other Features
- Built-In Specialised Receiver amplifier for 50 MHZ
- Three antenna connectors are provided, with the possibility of assigning the "ANT-3" connector to "RX-Only"
- Signal output for an external receiver
- 9 MHz IF output
- High Speed Automatic antenna tuner built-in
- Optional µ-tune unit available
- USB Interface
Specifications |
FT DX 3000 Transceiver |
GENERAL | |
Rx Frequency Range | 30 kHz - 60 MHz (Operating) |
1.8 - 54 MHz (Specified performance, Amateur Bands only) | |
Tx Frequency Range | 1.8 - 54 MHz (Amateur Bands only) |
Frequency Stability | ±0.5ppm (after 1 minute @ -10ºC to +50ºC) |
Operating Temperature Range | -10ºC to +50ºC |
Emission Modes | A1A (CW), A3E (AM), J3E (LSB,USB), F3E (FM), F1B (RTTY), |
F1D (Packet), F2D (Packet) | |
Frequency Steps | 1/10Hz (SSB, CW, AM), 100Hz (FM) |
Antenna Impedance | 50Ω, unbalanced |
16.7Ω - 150Ω, unbalanced (1.8 - 29.7 MHz) | |
25Ω - 100Ω, unbalanced (50 - 54 MHz) | |
(Tuner ON, 1.8 MHz - 50 MHz Amateur bands, TX only) | |
Power Consumption | Rx (no signal) 1.8 A |
(approximate figures) | Rx (signal present) 2.1 A |
Tx (100W) 23 A | |
Supply Voltage | DC 13.8 V ±10% (Negative Ground) |
Dimensions (W x H x D, mm) | 365 x 115 x 312 |
Weight (approx, kg) | 10 |
TRANSMITTER | |
Power Output | 5 - 100 Watts (2 - 25 Watts AM carrier) |
5 - 50 Watts (AM carrier) | |
Modulation Types | J3E (SSB): Balanced |
A3E (AM): Low-Level (Early Stage) | |
F3E (FM): Variable Reactance | |
Maximum FM Deviation | ±5.0kHz/±2.5kHz |
Harmonic Radiation | Better than -60dB (1.8 - 29.7 MHz Amateur bands: Harmonics) |
Better than -50dB 1.8 - 29.7 MHz Amateur bands: Others) | |
Better than -65dB (50 MHz Amateur band) | |
SSB Carrier Suppression | At least 60dB below peak output |
Undesired Sideband Suppr. | At least 60dB below peak output |
3rd-order IMD | -31dB @ 14 MHz 100 watts PEP |
Bandwidth | 3kHz (LSB/USB), 500Hz (CW), 6kHz (AM), 16kHz (FM) |
Audio Response (SSB) | Not more than -6dB from 300 to 2700 Hz |
Microphone Impedance | 600Ω (200 to 10kΩ) |
RECEIVER | |
Circuit Type | Double-Conversion Superheterodyne |
Intermediate Frequencies | 9.000 MHz / 30 kHz (24 kHz for AM/FM) |
Sensitivity | SSB (BW: 2.4 kHz, 10dB S+N/N) |
4µV (0.5 - 1.8 MHz, IPO "ON") | |
0.16µV (1.8 - 30 MHz, RF AMP2"ON") | |
0.125µV (50 - 54 MHz, RF AMP2"ON") | |
AM (BW: 6 kHz, 10dB S+N/N, 30% modulation @ 400 Hz) | |
28µV (0.5 0 1.8 MHz, IPO"ON") | |
2µV (1.8 - 30 MHz, AMP2"ON") | |
1µV 50 - 54 MHz, AMP2"ON") | |
FM (BW: 15 kHz, 12 dB SINAD) | |
0.5 µV (28 - 30 MHz, AMP2"ON") | |
0.35 µV (50 - 54 MHz, AMP2"ON") | |
* There are no specifications in frequency ranges not listed * | |
Selectivity (WIDTH: Centre) | Mode -6db -60dB |
CW/RTTY/PKT 0.5kHz or better 750Hz or less | |
SSB 2.4kHz or better 3.6kHz or less | |
AM 6kHz or better 15kHz or less | |
FM 15kHz or better 25kHz or less | |
Image Rejection | 70dB or better (1.8 - 30 MHz Amateur bands) |
60dB or better (50 - 54 MHz Amateur band) | |
Maximum Audio Output | 2.5W into 4Ω with 10% THD |
Audio Output Impedance | 4 to 8Ω (4Ω: Nominal) |
Conducted Radiation | Less than 4 nW |
Specifications are subject to change, in the interest of technical improvement, without notice or obligation, and are guaranteed only within the Amateur Bands. |
|
|
160 through 6 Meters - SSB/CW/FM/AM/Digital
With efficient dimensions of 14.4" x 4.5" x 12.3" (W x H x D) and weighing in at only 22 pounds, the FT DX 3000D is a solidly packed tranceiver ready to give very high performance on all Amateur Radio bands from 160 to 6 meters.RTTY/PSK31 Encode / Decode Included Various easy connections available for RTTY, SSTV, PSK31, JT, and other Digital Modes100 Watts of Solid Performance The RF Final Amplifier produces a clean 100 watt (some modes less)transmit signal. A large heat sink is combined with the die cast aluminum chassis for efficient heat dissipation. A cooling fan located beside the final amplifier and the TX Low Pass Filter ventilates the heat away from inside of the transceiver cabinet. This large axial flow fan is mechanically isolated from the chassis to reduce vibration and noise. The speed of the fan is continuously controlled by the temperature of the PA amplifier; starting at 40 degree C.Antenna Tuner Included High Speed Automatic Antenna Tuner included. The antenna tuner uses LC switching. It has a large capacity 100 channel memory; the tuning data is automatically memorized to reduce tuning time when changing frequency.Famous Yaesu Main Tuning Knob A heavy weighted balanced brass core knob is used to give the famous Yaesu smooth flywheel operating feel to the FT DX 3000D Main Dial Knob. Each user may set his/her favorite torque feeling of the Main Dial rotation.IF Output 1st IF 9MHz signal with wide bandwidth IF Output available on the Rear Panel for after-market band scopes, CW Skimmer, etc.USB Capable USB input included for firmware updates. This input can also facilitates CAT, USB AUDIO IN / OUT and USB TX Control (PTT, KEY and FSK)Remote Control From A Distant Location External control (CAT) is possible using USB or Serial Port; this feature means the FT DX 3000D can be remotetly controlled from a distant location!Big TFT Full-Color Display For Superior Operability and Visibility The FT DX 3000D presents a wide view angle, high contrast LCD 4.3 inch TFT impressive full color display that provides a convenient view of the radio’s working functions. Superior operability is realized with this convenient display. It permits excellent visibility from different viewpoints. Even with the many FT DX 3000D features and functions, the TFT display makes operation of the radio easy and comfortable.Top Performing RF Front End The RF Front End circuit is the most important element because it ultimately determines the HF Receiver performance. Our Yaesu Engineering team has concentrated superior RF Engineering knowledge into the design of the FT DX 3000D front end.Down Conversion Receiver and Powerful Narrow Bandwidth Crystal Roofing Filters The powerful narrow bandwidth crystal roofing filter enhances the receiver multi-signal characteristics. The FT DX 3000D "Down Conversion" receiver construction is similar to the FT DX 5000. The first IF frequency is 9 MHz. This makes possible narrow bandwidth crystal roofing filters (300 Hz, 600 Hz or 3 kHz) with a sharp shape factor that creates amazing multi-signal receiving performance. The powerful narrow bandwidth crystal roofing filter enhances the receiver multi-signal characteristics.Effective QRM and QRN Rejection Effective QRM rejection is achieved from the FT DX 3000D IF DSP. The 32-bit high speed floating decimal point DSP, TMS320C6727B (maximum 2800 MIPS/ 2100 MFLOPS) made by Texas Instruments, is used for the IF section of the FT DX 3000D. The signal is processed with the high speed 300 MHz clock frequency.Very Low Noise Floor - Terrific Signal to Noise Ratio The S/N ratio (signal-to-noise ratio) of the local signal that is injected into the 1st IF mixer is one of the most important factors for improving the receiver properties in the ultra-multi-signal environment.Three IPO Settings - Best Signal Reception During Changing Band Conditions 3-step IPO settings permit the operator to select the most appropriate gain for best signal reception. This variety of selections provides superior receiver performance and the best possible communications with changing band conditions.High Quality Audio With Punch The modulation circuit of the FT DX 3000d utilizes digital variation operational modulation, which creates ideal high quality transmission audio.Three Antenna Inputs Three antenna connectors are available on the FT DX 3000D Rear Panel.CW Features Galore • CW APF (Receiver Audio Peak Filter) with 3 bandwidth steps5 Digital Voice Messages Each memory channel is capable of storing up to 20 seconds of audio using the optional DVS-6.RX Output The "RX Output" connector on the FT DX 3000D Rear Panel accesses the signal from the receiver RF amplifier. The signal can then be output to an external receiver for in-band simultaneous receiving.Optional Fully-Automatic µ-Tuning Kit The u-Tuning Kit that was developed for the FT DX 9000, is optionally available for use with the FT DX 3000D. No other Amateur Radio radio manufacturer offers a comparable device that may improve your DXing performance in some challenging operating situations. |
FT-DX3000 Yaesu zendontvanger-HF en 50 Mhz
- Merk: Yaesu
- Model: ftdx3000
- Beschikbaarheid: 2 - 3 dagen
-
€ 1.449,00
- Excl. BTW: € 1.197,52
Gerelateerde producten
GSV3000 Diamond voedingsapparaat
€ 195,00 Excl. BTW: € 161,16
Yaesu MD-100A8X Tafel microfoon
€ 125,00 Excl. BTW: € 103,31
SEC-1225G Samlex AC-DC voedingsapparaat
€ 129,00 Excl. BTW: € 106,61
SCU-17 Yaesu USB interface
€ 145,00 Excl. BTW: € 119,83
DVS-6 spraaksunthesizer unit -digitale recordervan Yaesu
€ 47,50 Excl. BTW: € 39,26
LDG YT-1200 automatische antennetuner
€ 299,00 Excl. BTW: € 247,11
MFJ-939 Y plug en play automatische tuner voor Yaesu
€ 199,00 Excl. BTW: € 164,46
Tags: FT-DX3000, Yaesu, zendontvanger, HF en 50 Mhz