De X1M wordt niet meer geproduceerd.
Nu incl X1M.CAT RS232 interface!
X1M Transceiver Kit 5 banden QRP
X1M V3.0 Platinum Edition ,de nieuwste versie. Prestaties en het uiterlijk van de machine zijn sterk verbeterd.
The X1M is a small 5-band QRP transceiver for 80/40/20/15/10m for SSB and CW with 5 watts output power. The device has a continous receive coverage from 0.1 to 30MHz.
The transmitter is continous up to 30MHz 'in principle', but there are harmonic filters only for the bands 80/40/20/15/10m. For operation outside of these bands a separate (external) low-pass filter is required.
The supply voltage ranges from 9.6V to 14.5V. While receive, the small radio needs only 350mA, in the case of transmission the power consumption goes up to max. 1200mA.
An automatic CW keyer is built in to the X1M. 100 memory channels and a switchable backlight simplify the operation not only in portable use. In addition, the controls can be locked against accidental operation.
A built-in CAT interface makes the X1M also suitable for automatic logging and control. The serial interface (9pin Sub-D) on the rear supplies TTL level(!) signals. An optional interface provides a level converter to RS-232 levels. The interface emulates an Icom radio (IC-718) and can therefore be used with almost any logbook program.
The receiver sensitivity is better than 0.45 µV.
•Modes: USB, LSB, CW
•Receive bandwidth: 2.2kHz
•max. 5Watt Output
•100 Memory Channels
The transceiver is supplied in cabinet with
•3.5 mm jack for Morse Key
X1M Transceiver Pro QRP 5-Band V3
- Model: x1m
- Beschikbaarheid: Out Of Stock
- Excl. BTW: € 247,11