The LDG YT-100 auto tuner fills a need for Yaesu transceiver owners who own the FT-100, FT-100D, FT-857, FT-857D, FT-897 and FT-897D. With the integrated CAT port control, the tuner is powered from the interface. Operation could not be simpler: Just press the tune button on the tuner and everything else happens automatically, including tuning at low power. It operates from 160 to 6 meters with from 1 to 125 watts.
Yaesu radio are among the best, and LDG makes a dedicated bolt-on tuner for the FT-897, but that leaves a big chunk of the Yaesu product line with no dedicated tuner. Of course, most LDG tuners will work just fine with Yaesu radios, but it sure would be nice to have it integrated to the radio.
LDG's new YT-100 is just that. An included CAT cable interfaces with your FT857, FT897 and FT-100 (including all D models). This makes it an integrated tuner powered by the interface. No extra power cables are needed. Just press the tune button on the tuner and everything else happens automatically! The mode is set to carrier and the RF power is reduced, a tune cycle runs and the radio is returned to the original settings.
- RF Power: 1 to 100 watts SSB, CW and digital modes.
- Latching relays for ultra low power consumption
- Built-in CAT interface for FT-100(D), 857(D) and 897(D) radios.* Powered from Yaesu radio over CAT port.
- CAT thru port for computer control of radio. 4800 baud.
- 2000 memories sorted by frequency.
- 1.8 to 54 MHz coverage (continuous coverage for MARS)
- Tunes 4 to 800 ohms. (16 to 150 on 6M)
- SO-239 in and out connections for dipoles, verticals, beams, G5RV, OCF, Cobra, ect.
- Dimensions: 17 H , 17 W, 4 cm H. Weight: 900 gram
- Includes 30 cm CAT interface cable and 30 cm coax jumper
*Note: Not for FT-450 or FT-950. Use AT-100Pro or AT200Pro
RYS is officieel importeur van LDG
LDG YT-100 automatische antennetuner voor Yaesu
- Merk: LDG
- Model: YT100
- Beschikbaarheid: Op voorraad
- Excl. BTW: € 200,83