• Remoterig RRC1258MKIIkit afstandsbediening via internet

Remoterig - de perfecte transceiver afstandsbediening via LAN, WLAN en internet

Dit systeem maakt afstandsbediening van alle transceivers met PC-interface van Alinco, Elecraft, Icom, Kenwood, Yaesu en het doorgeven van TX en RX audio met een uitstekende geluidskwaliteit mogelijk.

CW bedrijven is zelfs mogelijk. De volgende  transceivers met afneembare bedieningspaneel kunnenvolledig met Remoterig worden bediend zonder PC: ICOM IC-703, IC-706, Kenwood TS-480SAT/HX, TS-2000 (RC-2000 vereist), Alinco DX-SR8T, ICOM IC-2820, IC-R2500.

De kit bestaat uit een stuur en controle-eenheid.

Via de besturingseenheid wordt de zendontvanger aangesloten op het Internet. Display en microfoon worden aangesloten op de controle-eenheid en maakt het mogelijk om te werken over het netwerk en het internet.

Meerdere transceivers met PC-interface kunnen via de  software, zoals hamradio deluxe bediend worden. De zendontvanger wordt aangesloten via de besturingseenheid met het internet.

Op de besturingseenheid wordt de microfoon en luidspreker audio aangesloten. Via de seriële interface  en de controleunit worden transceiver en PC  verbondeng.

Toegang via het internet kan door wachtwoord worden beschermd tegen onbevoegde toegang. In plaats van de afstandsbediening kan een PC client gebruikt.

Daardoor wortdt QSO met PC maken mogelijk, en is  een display of afstandsbediening module niet vereist

 

 

The Remoterig RRC-1258MkII is the main product which can be used in most sytem configurations. Learn more on theHow it works page and the system configuration page.

 

RRC-1258MkIIs (dualRX) is sold in pairs assembled tested but not configured. Included in the package is one USB cable, Power cables (2 pc), Cat 5 cable for making IC-706 cable and a 2xRJ-45 extender.

Separate Control- or Radio boxes are also available in the Webshop.

Cables for the major Radio models can be bought from the Webshop

Technical Data:

Product/Art no:

Remoterig RRC-1258MkII

Dimensions (L x H x D):

165 x 140 x 34 mm

Weigth:

2 x 250 g (excl. power supply.)

Ip class:

IP20

Power supply requirement:

10-18V DC via DC Plug 2.1 mm/5.5mm

Current drain at 13,8V:

App. 160 mA up to app. 600 mA depending on audio level and ev. backlighter

Network connection:

RJ45 T-Base10/100

Speaker amplifier:

2W (8 ohm)

Mic input:

Dynamisk eller Electret med DC feeding

Radio protocol (detachable front)

Kenwood TS-480, TS-2000
ICOM IC-703, IC-706, IC-E2820, IC-R2500.

Radio protocol (traditional contr.)

ICOM CI-V, Kenwood PC-control, Yaesu CAT, Elecraft

Protocol Internet

TCP/IP,UDP, DHCP, SIP, RTP, DNS, DynDNS etc.

Codecs.

G711 A-law (8kHz/8bit), 8kHz/16bit, 16kHz/16bit mm.

Bandwidth demands:

From app. 90 kBit/s up to ap.p 1 MBit/s depending on Codecs and settings.

USB:

USB 2.0 (mini USB)

Serial ports ( transparent):

2 x RS-232 (57600 baud) 1 x TTL (57600 baud)

CW-keyer:

10-40 WPM, Iambiq A/B, Squece, sidetone

System configurations

Thre Remoterig RRC-1258MkII system can be used in many different ways. The most important configurations are showed on the pictures below.

Control panel mode

The most common way of using the system is with radios which have detachable control panels. Whith those radios you keep the real radio feeling as the system works exactly as when you have the control panel connected direct to the radio. And the most important thing is that no PC.s are needed at all. The Remoterig are tested and supports the following rigs with detachable control panels.

Kenwood: TS-480, TM-D710, TS-2000
Yaesu: FT-857,FT-8800, FT-8900
ICOM: IC-703, IC-706, IC-R2500, IC-2725, IC-2820, ID-E880
Alinco: DX-SR8

Note ! IC-7000 can NOT be used in this mode as the display info is sent as analog video signal.

 

Elocraft K3- Twin Concept

The Elecraft K3 Twin concept gives the same feeling as the control panel mode. The Elecraft K3 Twin concept is a high end concept for the serious ham who do not accept any compromise even when remote controlling his station. You can use the K3/0, K3/10 or K3/100 as control. The K3/0 is a specially design control unit.

image

Yaesu Twin Concept

The Yaesu Twin concept gives the same feeling as the Control panel mode above as you use a second transceiver as control “panel”. This is of course a more expensive way of remote controlling but it gives you the posibility to use the best radios available on the market even for remote control. This mode supports FT-450, FT-950, FT-2000, FT-5000 and FT-9000 even in cross combinations.
No PC.s are needed in this configuration either.

Replacing traditional PC-Remote control

The Remoterig system supports more traditional PC controlled remote control also, with the important difference that you do not need a PC on the Remote site. Most radios with some kind of serial remote control interface from Kenwood, ICOM,Yaesu, Elecraft, Tentec etc are supported

PC-remote control

We also have a system called RRC-Micro which not need a Remoterig box in the control end, only a PC is needed with a our software client and the small USB-PTT/audio box. This system is very handy to use when traveling for example as you can use you laptop and connect to wireless LANs or mobile networks where ever you are.

Control panel and PC-remote control in combination

The control panel mode and the PC-control mode can be combined also so you can use the control panel when at home and the RRC-Micro PC based system when travelling.

 

Geef beoordeling

Note: HTML-code wordt niet vertaald!
    Slecht           Goed

Remoterig RRC1258MKIIkit afstandsbediening via internet

  • Merk: Onbekend
  • Model: RRC1258MkII
  • Beschikbaarheid: Out Of Stock
  • € 499,00

  • Excl. BTW: € 412,40